In stock
SKU
CTV Modell 06NCV - Düsenrückschlagventil

CTV Model 06NCV - Nozzle Check Valves - Silent Type DN50-DN1200 (PN10/PN16/PN25)

CTV Model 06NCV - Nozzle Check Valves - Silent Type DN50-DN1200 (PN10/PN16/PN25)

 

CTV Type 06NCV-Non Slam Check Valves are used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It provides not only quiet performance but also low head loss.

Fields of Application: Mainly used for clean water, precleaned sewage water, Fire-fighting, Irrigation, Cooling and HVAC System.

Features:
- High strength ductile iron body used for durability and less weight.
- Dynamic design of single body with diffuser which provides a streamline flow and assures lower head loss.
- One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of the standard check valves.
- Bronze bushing reduce wearing problem during operation.
- Spezialized design with spring ensures non slamming and prevents water hammer.
- Stainless steel spring hidden in the diffuser under protection while valve in operation.
- Disc will close before reverse flow, maximize closing speed up to 0.2 Sec.
- Installation can be vertical/horizontal/ inclined. For size DN800 and up, a vertical installation is stronly recommended.

Technical Data:
Face to face length series 48 acc. to EN 558-1 series 14 (F4)
Size Range: DN50-1200mm
Pressure Ratings: PN10, PN16 and PN25
Working Temperature: -10C - 80C
Flow Media: Clean Water
Flange Connections according EN 1092-2 (ISO 7005-2): PN10, PN16, PN25.
Coating: inside and outside AKZO NOBEL RESICOAT min 250μm fushion bonded epoxy powder coating. All materials in contact with the medium acc. UBA-KTW and Conform to DVGW W-270.

Write Your Own Review
You're reviewing:CTV Model 06NCV - Nozzle Check Valves - Silent Type DN50-DN1200 (PN10/PN16/PN25)

Our Brands